Karibu katika KingSong PCB Technology
Picha: 6 Tabaka Plethismografia Udhibiti Na Immersion Gold Matibabu Designing Circuit Boards
Hii Printed Circuit Bodi ni 6 Tabaka Plethismografia Udhibiti Na Immersion Gold Matibabu Designing Circuit Boards, kutumika katika Consumer Electronics, baadhi kama Terminals Handheld, PCB Circuit Board kwa kuzamishwa Gold uso Finishing ni mipako kati ya sehemu na wazi pcb mzunguko bodi, KingSong tehnology kama mtaalamu PCB Manufacturer si tu kutoa 6 tabaka pcb bodi, lakini pia 8 safu pcb 10 safu pcb au 12 safu pcb nk
1.Detail PCB Uzalishaji Uwezo:
| Hapana. |
item |
Misa uzalishaji |
mfano |
| 1 |
tabaka |
1-8 tabaka |
1-36 tabaka |
| 2 |
Max. jopo Size |
600 * 770mm (23.62 "* 30.31") |
600 * 770mm (23.62 "* 30.31") 500 * 1200mm (19.69 "* 47.24") |
| 3 |
Max.Board Unene |
8.5mm |
8.5mm |
| 4 |
Min. bodi Unene |
2L: 0.3mm,
4L: 0.4mm,
6L: 0.8mm |
2L: 0.2mm,
4L: 0.4mm.
6L: 0.6mm |
| 5 |
Min Inner Tabaka Clearance |
0.1mm (4mil) |
0.1mm (4mil) |
| 6 |
Min Line upana |
0.075mm (3/3 mil) |
0.075mm (3/3 mil) |
| 7 |
Min Nafasi ya mstari |
0.075mm (3/3 mil) |
0.075mm (3/3 mil) |
| 8 |
Min.Hole Size |
0.15mm (6mil) |
0.15mm (6mil) |
| 9 |
Min plated shimo unene |
20um (0.8mil) |
20um (0.8mil) |
| 10 |
Min Blind / kuzikwa shimo ukubwa |
0.1mm (4mil) |
0.1mm (1-8layers) (4mil) |
| 11 |
PTH Dia. kuvumiliana |
± 0.076mm (± 3mil) |
± 0.076mm (± 3mil) |
| 12 |
Mashirika PTH Dia. kuvumiliana |
± 0.05mm (± 2mil) |
± 0.05mm (± 2mil) |
| 13 |
Hole Nafasi Kupotoka |
± 0.05mm (± 2mil) |
± 0.05mm (± 2mil) |
| 14 |
Heavy Coppe |
4oz / 140μm |
6oz / 175μm |
| 15 |
Min S / M Pitch |
0.1mm (4mil) |
0.1mm (4mil) |
| 16 |
Soldermask rangi |
Green, nyeusi, bluu, White, Yellow, Red |
Green, nyeusi, bluu, White, Yellow, Red |
| 17 |
silkscreen rangi |
White, Yellow, Red, Black |
White, Yellow, Red, Black |
| 18 |
Eleza |
Routing, V-Groove, beveling ngumi |
Routing, V-Groove, beveling ngumi |
| 19 |
Eleza Tolerance |
± 0.15mm ± 6mil |
± 0.15mm (± 6mil) |
| 20 |
peelable kinyago |
Juu, chini, mbili upande mmoja |
Juu, chini, mbili upande mmoja |
| 21 |
Controlled Plethismografia |
+/- 10% |
+/- 7% |
| 22 |
insulation Resistance |
1 × 1012Ω (Normal) |
1 × 1012Ω (Normal) |
| 23 |
Kwa njia ya Hole Upinzani |
<300Ω (Normal) |
<300Ω (Normal) |
| 24 |
Thermal Mshtuko |
3 × 10sec @ 288 ℃ |
3 × 10sec @ 288 ℃ |
| 25 |
Warp na Twist |
≤0.7% |
≤0.7% |
| 26 |
Nguvu Electric |
> 1.3KV / mm |
> 1.4KV / mm |
| 27 |
peel Nguvu |
1.4N / mm |
1.4N / mm |
| 28 |
Solder Mask Abrasion |
> 6H |
> 6H |
| 29 |
kuwaka |
94V-0 |
94V-0 |
| 30 |
Mtihani Voltage |
50-330V |
50-330V |
2.PCB risasi wakati: (kama unahitaji huduma ya haraka, pia wanaweza kukutana)
| Maelezo |
Double Layer |
4 Tabaka |
6 Tabaka |
8 Tabaka |
10 Tabaka au zaidi |
| Mfano (WD) |
3-5 |
7 |
8 |
10 |
12 |
| Misa uzalishaji (WD) |
7-9 |
10-12 |
13-15 |
16 |
20 |
3.Package: Inner kufunga utupu, nje ya kiwango carton sanduku kufunga.
4.Shipping:
A: Kwa DHL, UPS, Fedex, TNT nk
B: Kwa bahari wingi wingi kulingana na mahitaji ya mteja.
5.Kama haja nukuu za miradi yako PCB, pls kutoa zifuatazo info:
A: Quote kiasi,
B: Gerber faili katika 274-x format,
C: Ufundi mahitaji au vigezo (vifaa, safu, unene shaba,
bodi unene, uso kumaliza, solder kinyago / silkscreen rangi ...)
Kama maswali au unataka kujifunza zaidi, tafadhali tuma barua pepe kwetu kwa uhuru au kuzungumza na mfumo online, shukrani kwa msaada wako mapema!
