Mwalandiridwa KingSong PCB Technology
Image: Rapid 10 Mjitchi Impedance Control Ndipo pulagi mabowo Prototyping PCB dera bolodi
Izi Kusindikizidwa Dera Board ndi Rapid 10 Mjitchi Impedance Control Ndipo pulagi mabowo Prototyping PCB dera bolodi, ntchito Kugula Electronics, ena monga abulusa Olimba boma, A PCB Dera Board ndi kumiza Gold zinthu mopupuluma Kumaliza ndi ❖ kuyanika pakati pa chigawo chimodzi ndi pcb dera anabala bolodi, pantchito yathu pCB wopanga osati kupereka zigawo 10 pcb bolodi, koma 12 wosanjikiza pcb, 14 wosanjikiza pcb kapena 16 wosanjikiza pcb etc.
1.Detail PCB Kupanga katundu mphamvu:
| No. |
katunduyo |
kuŵeta |
zinachitika |
| 1 |
zigawo |
1-8 Mjitchi |
1-36 Mjitchi |
| 2 |
Max. gulu Kukula |
600 * 770mm (23.62 "* 30,31") |
600 * 770mm (23.62 "* 30,31") 500 * 1200mm (19.69 "* 47,24") |
| 3 |
Max.Board makulidwe |
8.5mm |
8.5mm |
| 4 |
Min. Board makulidwe |
2L: 0.3mm,
4L: 0.4mm,
6L: 0.8mm |
2L: 0.2mm,
4L: 0.4mm.
6L: 0.6mm |
| 5 |
Min Mumtima Gulu chilolezo |
0.1mm (4mil) |
0.1mm (4mil) |
| 6 |
Min Line m'lifupi |
0.075mm (3/3 mil) |
0.075mm (3/3 mil) |
| 7 |
Min Line danga |
0.075mm (3/3 mil) |
0.075mm (3/3 mil) |
| 8 |
Min.Hole Kukula |
0.15mm (6mil) |
0.15mm (6mil) |
| 9 |
Min yokutidwa dzenje makulidwe |
20um (0.8mil) |
20um (0.8mil) |
| 10 |
Min Akhungu / Kumizidwa dzenje kukula |
0.1mm (4mil) |
0.1mm (1-8layers) (4mil) |
| 11 |
PTH okayikitsa. kulolerana |
± 0.076mm (± 3mil) |
± 0.076mm (± 3mil) |
| 12 |
Non PTH okayikitsa. kulolerana |
± 0.05mm (± 2mil) |
± 0.05mm (± 2mil) |
| 13 |
Dzenje Udindo kupatuka |
± 0.05mm (± 2mil) |
± 0.05mm (± 2mil) |
| 14 |
lolemera Coppe |
4oz / 140μm |
6oz / 175μm |
| 15 |
Min S / M Muponyeni |
0.1mm (4mil) |
0.1mm (4mil) |
| 16 |
Soldermask mtundu |
Green, wakuda, Blue, White, wachikasu, wofiira |
Green, wakuda, Blue, White, wachikasu, wofiira |
| 17 |
Silkscreen mtundu |
White, wachikasu, wofiira, Black |
White, wachikasu, wofiira, Black |
| 18 |
LEMBA |
Yolozera, V-poyambira, Beveling nkhonya |
Yolozera, V-poyambira, Beveling nkhonya |
| 19 |
LEMBA Kulekerera |
± 0.15mm ± 6mil |
± 0.15mm (± 6mil) |
| 20 |
Peelable chigoba |
Top, pansi, wachiphamaso amaganiza |
Top, pansi, wachiphamaso amaganiza |
| 21 |
ankalamulira Impedance |
+/- 10% |
+/- 7% |
| 22 |
kutchinjiriza fundo |
1 × 1012Ω (Normal) |
1 × 1012Ω (Normal) |
| 23 |
Kudzera pabowo fundo |
<300Ω (Normal) |
<300Ω (Normal) |
| 24 |
matenthedwe Shock |
3 × 10sec @ 288 ℃ |
3 × 10sec @ 288 ℃ |
| 25 |
M'litali ndi kukachipinda |
≤0.7% |
≤0.7% |
| 26 |
Mphamvu Zamagetsi |
> 1.3KV / mamilimita |
> 1.4KV / mamilimita |
| 27 |
peel Mphamvu |
1.4N / mamilimita |
1.4N / mamilimita |
| 28 |
Solder Chigoba kumva kuwawa |
> 6H |
> 6H |
| 29 |
Flammability |
94V-0 |
94V-0 |
| 30 |
mayeso Voteji |
50-330V |
50-330V |
2.PCB patsogolo nthawi: (ngati mukufuna kutumikira mwachangu, nafenso tikhoza kukumana)
| Kufotokozera |
kawiri Gulu |
4 Gulu |
6 Gulu |
8 Gulu |
10 Gulu kapena pamwamba |
| Zitsanzo (WD) |
4 |
7 |
8 |
10 |
12 |
| Kupanga (WD) |
7-9 |
10-12 |
13-15 |
16 |
20 |
3.Package: Mumtima zingalowe kulongedza katundu, wakunja muyezo katoni bokosi wazolongedza.
4.Shipping:
A: Mwa DHL, UPS, FedEx, TNT etc.
B: Ndi panyanja kuchuluka misa malinga ndi chakudya chofunika kasitomala wa.
5.If kufunika ogwidwawo ntchito yanu PCB, chonde kupereka zotsatirazi Dziwani:
A: Mawu wambiri,
B: Gerber file mu 274-× mtundu,
C: zaumisiri lamulo kapena magawo (chuma, wosanjikiza, makulidwe mkuwa,
bolodi makulidwe, pamwamba kuwamaliza, solder chigoba / silkscreen mtundu ...)
Ngati mufunsa kapena mukufuna kudziwa zambiri, chonde tumizani imelo kwa ife mwaulere kapena kucheza ndi dongosolo online, chifukwa cha thandizo lanu pasadakhale!
